Factory greenhouses are decent, hence the bulk of summer visitors make them out of used frames, and craftsmen make the frames themselves. All this leaves the abyss of time frame for the winter have to shoot in the spring reset, double glazing rot, need replacement. I'm sick. A couple of years ago I saw in the garage, as a "Gazelle" throw out frames from daytime lamps. When the car left, I moved the carcasses to his garage and has to be thinking how they can be done. First, a stranger to me the intention to change the wooden fence on metal beds, in favor of what someone handy desire a broad panel. During the dismantling of zero, I do not throw away, and formed a huge heap of unnecessary rubbish - it is rib and side panels. Metal thin, easy to bend, galvanized and pokrashen.A then I decided: why the desire of them do not make the hooks, hoping to fix the glass in a greenhouse in the country, such as lining the walls of buildings? During the winter I done blanks, and spring out all the frame and started building a new greenhouse without rims. Greenhouse was a collapsible metal tubes, the foundation I made of a metal rod with a diameter of 8 mm and a length of 50 cm, welded corner 50x50 and stuck into the ground. By the corners welded frame greenhouses. Along the perimeter of the roof in relation to the size of glass crates made of planks and through injury harvested hooks secured glass. Angles, visor and place of the docking of the roof with a vertical wall covered with galvanized iron. The gap between the glass, about 3-5 mm does not stop up. On the glass in place of contact with the corner wore PVC pipe. The result was a very bright greenhouse. The following year in the same way glass in the second greenhouse, which has a wooden frame. On the roof is glass the size of 50x110, withstand the winter snow, but better, if 1-2 times over the winter to remove snow. Today I have gone a need to repair greenhouses.